Wired Connection
X-Input Mode
1. Using the included USB-C Cable, connect to the USB-C port at the top of the controller and connect the other end to an available USB port on the PC.
2. The controller LED2 will light up after connection. You can play XBOX platform games on your PC in wired mode, which is the default mode for wired PC connection.

Pro Controller Mode

1. Press and hold the '(-) Select button' and '( ) Start button' for 3 seconds.
2. The controller will be reconnected to the PC, and after successful connection, LED1 will light up after conection.
3. The device name recognized by PC is "Pro Controller". You can play Steam platform games on your PC in wired mode.

D-Input Mode

1. Press and hold the '(-) Select button' and '( ) Start button' for 3 seconds.
2. The controller will be reconnected to the PC, and after successful connection, LED3 will light up after conection.
3. The device name recognized by PC is "PC Gamepad ".

1. Turn off the controller.
2. Press and hold the 'Home Button','(-)Select Button'' and 'B Button' simultaneously for 2 seconds to enter the calibration mode, the LED1,2 and LED3,4 will flash alternately.
3. Place the controller on a flat surface and press the '( ) Start Button' to calibrate. The LED will turn off when calibration is complete.

Controller will not power on
If the controller will not turn on, it may be out of battery. Allow the controller to charge for 30 min and try again.

Controller keeps disconnecting
If the controller keeps disconnecting, make sure you are close enough to the Nintendo Switch console. Make sure there is no obstacles in the way that will impede the connection.

Controller is unresponsive
The controller may need a hard reset. Use a straightened paperclip to press the 'Reset Button '.

Hard Reset

1. Find the small hole 'Reset Button' on the back side of the controller.
2. Use a straightened paperclip to press the button.
3. The controller will turn off. Press the 'Home Button' to turn the controller back on.

Standby Mode

The controller is in wireless connection state and will automatically power off after 5 minutes without any operation;
2. Press the 'Home Button' to wake up the controller.